[Linux] hpssacli 명령어 정리

 

❤️ 연관 포스팅 ❤️
👉 perccli 명령어 & 설치방법 정리
👉 MegaCLI 설치 및 기본 명령어

 

 

hpssacli 콘솔 접속

[root@www-1 bld]# ./hpssacli
HPE Smart Storage Administrator CLI 2.40.13.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
=>

 

controller와 디스크 상태 확인

=> ctrl all show config

Smart Array P840ar in Slot 0 (Embedded)  


   Port Name: 1I

   Port Name: 2I

   Internal Drive Cage at Port 1I, Box 1, OK

   Internal Drive Cage at Port 1I, Box 1, OK

   Internal Drive Cage at Port 2I, Box 2, OK
   array A (SAS, Unused Space: 0  MB)


      logicaldrive 1 (558.9 GB, RAID 1, OK)

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 600 GB, OK)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 600 GB, OK)

   array B (SATA, Unused Space: 0  MB)


      logicaldrive 2 (25.5 TB, RAID 6, OK)

      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 4000.7 GB, OK)
      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 4000.7 GB, OK)
      physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SATA, 4000.7 GB, OK)
      physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SATA, 4000.7 GB, OK)
      physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SATA, 4000.7 GB, OK)
      physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SATA, 4000.7 GB, OK)
      physicaldrive 2I:2:1 (port 2I:box 2:bay 1, SATA, 4000.7 GB, OK)
      physicaldrive 2I:2:2 (port 2I:box 2:bay 2, SATA, 4000.7 GB, OK)
      physicaldrive 2I:2:3 (port 2I:box 2:bay 3, SATA, 4000.7 GB, OK)
      physicaldrive 2I:2:4 (port 2I:box 2:bay 4, SATA, 4000.7 GB, OK, spare)

 

컨트롤러 상태 확인

=> ctrl all show status
Smart Array P840ar in Slot 0 (Embedded)
   Controller Status: OK
   Cache Status: OK
   Battery/Capacitor Status: OK

 

물리디스크 상태 확인

=> ctrl slot=0 pd all show status
   physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 600 GB): OK
   physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 600 GB): OK
   physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 4000.7 GB): OK
   physicaldrive 1I:1:4 (port 1I:box 1:bay 4, 4000.7 GB): OK
   physicaldrive 1I:1:5 (port 1I:box 1:bay 5, 4000.7 GB): OK
   physicaldrive 1I:1:6 (port 1I:box 1:bay 6, 4000.7 GB): OK
   physicaldrive 1I:1:7 (port 1I:box 1:bay 7, 4000.7 GB): OK
   physicaldrive 1I:1:8 (port 1I:box 1:bay 8, 4000.7 GB): OK
   physicaldrive 2I:2:1 (port 2I:box 2:bay 1, 4000.7 GB): OK
   physicaldrive 2I:2:2 (port 2I:box 2:bay 2, 4000.7 GB): OK
   physicaldrive 2I:2:3 (port 2I:box 2:bay 3, 4000.7 GB): OK
   physicaldrive 2I:2:4 (port 2I:box 2:bay 4, 4000.7 GB, spare): OK

 

물리 디스크 상세 확인(개별 확인)

=> ctrl slot=0 pd 2I:2:3 show detail
      physicaldrive 2I:2:3
         Port: 2I
         Box: 2
         Bay: 3
         Status: OK
         Drive Type: Data Drive
         Interface Type: SATA
         Size: 4000.7 GB
         Drive exposed to OS: False
         Native Block Size: 512
         Rotational Speed: 7200
         Firmware Revision: HPG4
         Serial Number: XXXXX
         Model: ATA     MB4000GVYZK
         SATA NCQ Capable: True
         SATA NCQ Enabled: True
         Current Temperature (C): 35
         Maximum Temperature (C): 41
         PHY Count: 1
         PHY Transfer Rate: 6.0Gbps
         Drive Authentication Status: OK
         Carrier Application Version: 11
         Carrier Bootloader Version: 6

 

모든 논리 드라이브 확인

 => ctrl slot=0 ld all show
 mart Array P840ar in Slot 0 (Embedded)

   array A

      logicaldrive 1 (558.9 GB, RAID 1, OK)

   array B

      logicaldrive 2 (25.5 TB, RAID 6, OK)

 

논리드라이브 상세 확인

=> ctrl slot=0 ld 2 show
Smart Array P840ar in Slot 0 (Embedded)

   array B

      Logical Drive: 2
         Size: 25.5 TB
         Fault Tolerance: 6
         Heads: 255
         Sectors Per Track: 32
         Cylinders: 65535
         Strip Size: 256 KB
         Full Stripe Size: 1792 KB
         Status: OK
         MultiDomain Status: OK
         Caching:  Enabled
         Parity Initialization Status: Initialization Completed
         Unique Identifier: ...
         Disk Name: /dev/sdb 
         Mount Points: /mnt/data_dir 25.5 TB Partition Number 2
         OS Status: LOCKED
         Logical Drive Label: ...
         Drive Type: Data
         LD Acceleration Method: Controller Cache

 

논리드라이브 삭제

ctrl slot=0 ld 2 delete

 

raid5 논리드라이브 생성

ctrl slot=0 create type=ld drives=2I:1:3, 2I:1:4, 2I:1:5, 2I:1:6 raid=5

 

논리 볼륨에 새로운 하드 추가

ctrl slot=0 ld 2 add drive=2I:1:9,2I:1:10

 

spare 디스크 추가

ctrl slot=0 array all add spares=2I:1:9

 

물리 드라이브 LED On/Off

ctrl slot=0 pd 2I:1:6 modify led=on
ctrl slot=0 pd 2I:1:6 modify led=off